Подробное oбъяснение, назначение каждого элемента схемы и принцип работы импульсного блока питания

Schematic diagram of a pulsed power supply. This power supply has a peak power of approximately 100 W and is built using a flyback topology, with a CR6842S microcircuit as the control element. Output voltage: 12 V (6-8 A). Pulse transformer parameters: Standard EE25 cores The primary winding should be wound with a conductor no thinner than 0.3 mm in diameter. It is recommended to use a double conductor with a diameter of 1 mm for the secondary winding. A small current flows through the auxiliary third winding, so a conductor with a diameter of 0.2 mm is sufficient. Link to the diagram: https://www.kirich.blog/uploads/posts...