Installing Clutch thru Transfer Case! 1984 Jeep CJ7

I have added chapters, you can go directly to any spot in the video. 00:00 Introduction 00:21 Disassembly Of The Bell Housing 01:18 Draining Oil Out Transmission 01:33 Degreasing The Bell Housing And Other Parts 03:22 Sand Blasting Shields And Clutch Fork 04:01 Preparing The Shields For Paint 04:21 Powder Coating The Clutch Fork 04:30 Painting The Shields 05:04 Wet Sanding The Shields 05:28 Painting The Shields 06:06 Reviewing What Has Been Done So Far 06:59 Work Starts On The Transmission To Get It Ready For Install 08:25 Cleaning Up The Fly Wheel, Clutch Disk, And Pressure Plate 09:52 Work Starts On The Transfer Case, Paint, To Get It Ready Install 12:49 Moving The Engine To Start Assemble Of All The Parts 13:34 Reviewing All The Parts To Be Installed 13:59 Installing The Harmonic Balancer Bolt 14:21 Step 1 Install Fly Wheel Shield 14:32 Step 2 Install The Fly Wheel 15:36 Step 3 Install The Clutch Assemble 16:58 Step 4 Assemble the Clutch Fork Into The Bell Housing 18:49 Step 5 Install The Bell Housing 19:12 Step 6 Install The Transmission, First Attempt 20:03 Explanation Of Why The First Attempt Failed 20:39 Removing The Bell Housing And Loosening The Clutch Assemble 20:54 Using the Transmission As An Alignment Tool 22:25 Step 6 Install The Transmission, Second Attempt 24:11 Installing Bottom Cover On Transfer Case 25:31 Step 7 Installing The Transfer Case 26:24 Step8 Install The Assemble Into The Frame 28:28 Conclusion