Arduino İle Boy Ölçer Yapımı | HC-SR04 Mesafe Sensörü İle Boy Ölçer (Kod + Şema)

In this video, the construction stages of the height meter project created using Arduino UNO, HC-SR04 Ultrasonic Distance sensor, 8x8 Dot Matrix (4 modules) are explained. The distance sensor used in the project was hung on the wall at a distance of 210 cm from the floor. When an object or person of 150 cm or more is under the sensor, the sensor measures and subtracts the measured value from 210 cm and prints it on the dot matrix display. "Arduino Height Gauge" appears on the screen when there is no object or person. Project codes and connection diagram are in the link at the bottom. Hope it's useful... Timeline of the video; 00:00 Check-in 00:39 Bill of Materials 01:17 Construction stages 05:30 Wiring diagram 07:55 Reviewing and uploading codes 16:03 Testing the project To subscribe to the channel;    / @orhanceleprobotik   My published books; 1- Step by Step Arduino Applications 2- Step by Step Arduino Coding with Mblock 3- Micro:bit coding with Code Blocks NOTE: In order to download the code and connection diagram, you must right click on the file that appears on the page that opens after clicking the link below and select download. Sometimes you may need to sign in with a gmail account. Cannot download over phone. If you have a download problem, try with another browser (Google Chrome). You must use a rar or zip compression program to open the downloaded file. To reach the Code and Scheme of the Project; https://drive.google.com/drive/folder... #arduinoprojeleri #boyolcer #arduinoboyolcer