How to Replace Rear Axle Bearings & Seals 2009-2010 Dodge Ram 1500

Shop for New Auto Parts at 1AAuto.com https://trq.video/c-384-mi This video shows you how to install new rear axle bearings & seals from TRQ on your 2009-2010 Dodge Ram 1500. This repair was done on a 2009 Dodge Ram 1500 ST 5.7L Crew Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles: 2009 Dodge Ram 1500 2010 Dodge Ram 1500 Tools you will need: • Pry Bar https://trq.video/oaNR-1AXAA00020 • 13mm Socket • 21mm Socket • 22mm Socket • 8mm Socket • Bearing Puller • Slide Hammer • 1/2 Inch Impact Gun • 3/8 Inch Impact Gun • Ratchet • Socket Extensions • Swivel • Torque Wrench https://trq.video/ocyL-1AXAA00044 • Cloth Rags • Gear Oil • Gloves https://trq.video/odGH-1AXSS00048 • RTV • Safety Glasses • Drain Pan • Floor Jack • Hammer • Jack Stands • Magnet - Extendable • Razor Blade / Gasket Scraper Subscribe:    / @trq   📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.