Моя первая ленточная пила

The first band saw appeared in the workshop, for which I can’t think of a permanent place, since there is no place. However, this is a completely different story, today we will unpack the new product and give a full review. Setting up and adjusting the band saw is a separate topic, and a lot of time was spent on all these manipulations, there is no experience, little knowledge, in practice everything does not go as smoothly as on the Internet. But we will overcome this difficulty, since without proper adjustment, it is simply impossible to get the desired result from this type of tool. There will also be a comparison of a circular and band saw, in my subjective opinion I will tell you about the pros and cons of these tools, and what is preferable to choose at the first stages. Oh yes, I chose the RedVerg RD-BS245 band saw, since I am absolutely not familiar with this type of tool, and I do not fully understand how it will be used. Based on this, it was decided to start with a budget one. Link to the saw: RedVerg RD-BS245 band saw – https://ozon.ru/product/pila-lentochn... 00:00 new tool in the workshop 00:50 unpacking the RedVerg band saw 02:17 review of the RedVerg band saw 04:19 assembling the base 06:37 adjusting the band saw 14:00 first experience of sawing on a band saw 16:41 re-adjusting the saw 18:03 results on the RedVerg band saw 20:23 circular saw or band saw 22:42 do you need a band saw in workshop #toolreview #RedVerg #project500