Neptune 4 Max Review and a FIX for the PROBLEMS EVERYONE IS HAVING

STL's and links: https://fpfdesigns.com/ My starting GCODE (for OrcaSlicer): --------------------------------------------------------- ;ELEGOO NEPTUNE 4 MAX M220 S100 ;Set the feed speed to 100% M221 S100 ;Set the flow rate to 100% M104 S140 ;set nozzle to 140C, but don't wait for it M190 S[bed_temperature_initial_layer_single] ;set bed temp and wait for it G4 P1500000; wait 25 minutes for the bed temp to stabilize further G29 ;auto bed-leveling G90 ;absolute positioning G1 Z10 F300 G1 X1.5 Y10 F6000 G1 Z0 F300 M109 S[nozzle_temperature_initial_layer] G92 E0 ;Reset Extruder G1 X1.5 Y10 Z0.4 F300 ;Move to purge start position G1 Y110 E30 F400 ;Draw purge line G1 Z0.6 F120.0 ;Move up a little G1 Y105 F3000 G92 E0 ;Reset Extruder --------------------------------------------------------- My N4Max Orca Profile: https://fpfdesigns.com/software/N4Max... N4 Camera Mount:    • 3D Printed Camera Mount for Neptune 4 Max   Outro music is "Quantum" by "Vapora", used with explicit permission from the artist.    • Quantum   New videos published every Friday, featuring a new 3D printed functional object, how I use it, and design considerations. The work depicted in this video is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License or other non-commercial license. elegoo n4max n4m overextrusion underextrusion gcode fixed layer shift orca slicer heatbed saturation dial indicator klipper functional print fpf PLA