How to Build the VENOM-S | 3D-Printed RC Sport Jet Build Guide

Complete step-by-step build guide for the VENOM-S 3D-printed RC sport jet! ━━━━━━━━━━━━━━━━━━━━━━━ 📂 Build manual and STL files: 👉 https://cults3d.com/en/3d-model/game/... ✈️Flight Video: 👉   • VENOM-S | 3D Printed Sport Jet with 64mm E...   ⬇️Free Model Stand: 👉https://cults3d.com/en/3d-model/game/... ✈️ Don’t forget to subscribe for more 3D-printed RC jet designs, flight tests, and build tutorials! ━━━━━━━━━━━━━━━━━━━━━━━ 🔧 VENOM-S – Components I used ━━━━━━━━━━━━━━━━━━━━━━━ • 64mm EDF (3300KV): https://s.click.aliexpress.com/e/_c4l... or similar • 60/80A ESC • 3.5mm connectors (you might need them depending on your ESC): https://s.click.aliexpress.com/e/_c2J... • 4S 2200mAh LiPo Battery: https://s.click.aliexpress.com/e/_c4W... or similar • Velcro straps: https://s.click.aliexpress.com/e/_c4E... • Receiver: 4–6 channels • Servos [9–12g, metal gears]: https://s.click.aliexpress.com/e/_c3h... or similar • Carbon tube [1× 500mm × 6mm]: https://s.click.aliexpress.com/e/_c3j... • 2mm Carbon rods: https://s.click.aliexpress.com/e/_c3k... • Linkages [1.5mm steel rods]: https://s.click.aliexpress.com/e/_c3C... • Linkage stoppers [2.1mm diameter]: https://s.click.aliexpress.com/e/_c3z... • Round magnets 12× (6 × 3mm): https://s.click.aliexpress.com/e/_c4r... • Servo extensions [15cm & 20cm + Y cables]: https://s.click.aliexpress.com/e/_c4X... • Servo reverser (only needed with 4-ch receivers): https://s.click.aliexpress.com/e/_c3g... ━━━━━━━━━━━━━━━━━━━━━━━ 🌐 Community & Social ━━━━━━━━━━━━━━━━━━━━━━━ 🔹 LSPlanes Official Facebook Group   / 1242674790164757   🔹 My personal Facebook profile   / lorenzo.sardo.16   ━━━━━━━━━━━━━━━━━━━━━━━ ℹ️ Affiliate Disclosure ━━━━━━━━━━━━━━━━━━━━━━━ Some of the links above are affiliate links. If you purchase through these links, I may earn a small commission at no extra cost to you. This helps support the channel and future projects — thank you! 🙏 ━━━━━━━━━━━━━━━━━━━━━━━ ⏱️ Chapters ━━━━━━━━━━━━━━━━━━━━━━━ 00:00 Introduction 01:38 Fuselage assembly 03:54 Elevator servos installation 05:57 Stabs assembly 07:12 Rudder servo installation 08:53 Wings 13:37 Elevators and rudder 15:39 EDF and ESC installation 17:41 Wings installation 18:15 Final part