Beginner CNC Setup in Millmage | How to Add an Endmill & Set Feeds and Speeds

If you’re new to CNC, this is the video you need to watch before you break bits or ruin material. I’ll show you exactly how to set up an endmill inside Millmage using real specs from my IDC Woodcraft starter kit. In this beginner-friendly guide, you’ll learn: ✅ How to set up your first tool library in Millmage ✅ The difference between feed rate, spindle speed, plunge rate, and chip load ✅ How to adjust feeds and speeds when your spindle RPM is lower than recommended ✅ Simple tricks for converting inches to millimeters ✅ How to visualize your tool setup so you understand exactly what’s happening during a cut We’ll set up the IDC Woodcraft 1/8" Upcut Endmill step by step, using the published data, and I’ll show you how to tweak the numbers if your CNC can’t quite hit the manufacturer’s recommended spindle speeds. This tutorial is perfect for anyone starting out on the Cubiko CNC or just learning Millmage for the first time. By the end, you’ll know how to confidently create a tool library and avoid costly mistakes. 📦 Tools in this video: IDC Woodcraft 1/8" Upcut Endmill (part of the 10-piece starter kit) 💻 Software: Millmage CNC Software If this video helps you, hit Like and Subscribe for more beginner CNC projects, tips, and real-world learning experiences. https://hobowithwood.com/cubiko #CNC #CNCbeginner #Millmage #CubikoCNC #CNCsetup #CNClibrary #FeedsAndSpeeds #EndmillSetup #IDCWoodcraft #DIYCNC #CNCprojects #CNCtutorial