EMCO Compact 5 PC Lathe with LinuxCNC and Fusion - Part 2
Part 2 on replacing the standard EMCO lathe control software with LinuxCNC and AutoDesk Fusion. This video covers testing that the motion scaling is correct, setting up tool offsets and homing the tool. 00:00 Introduction 00:22 Scaling test 03:57 Creating a tool table 09:22 Testing the tool table 11:37 Setting Machine (G53) Home 15:55 Setting Workpiece (G54) Home 16:34 Touching off X 23:48 Setting tool offsets using Tool Touch Off 28:07 Tsting the X tool offset 29:47 Touching off Z 41:36 Shutdown process Links: Github page: https://github.com/FloodJ/EMCOCompact... Toolholder decoder: https://www.carbideanddiamondtooling.... Tool orientation: http://linuxcnc.org/docs/stable/html/... -
▶︎
EMCO Compact 5 PC Lathe with LinuxCNC and Fusion - Part 1
▶︎
Emco Compact 8 compound slide enhancements
▶︎
deep inside an old industrial CNC Lathe! - Weiler Primus LinuxCNC retrofit pt.2
▶︎
OpenAI’s $1 Trillion Bullsh*t Is Falling Apart
▶︎
TOTAL IDIOTS AT WORK #103 | Instant Regret Fails Compilation 2025 | Best Fails of the Month
▶︎
10 Years of Mini Lathe Ownership: Pros, Cons, Modifications and Improvements
▶︎
CNC milling from 2 sides | Machining aluminum components from two sides
▶︎
Adding a Lubrication System For My Emco Mini CNC Lathe
▶︎
Is Putin Losing His Grip on Russia? | Steve Rosenberg
▶︎
IDIOTS AT WORK Mechanic Edition | Part 2
▶︎
I Bought a 1980's Mini CNC Lathe | Emco Compact 5 CNC
▶︎
CNC Motion Control with LinuxCNC + Mesa FPGA Card
▶︎
Whitworths 1862 Slotting Machine
▶︎
More about the EMCO UNIMAT SL Lathe
▶︎
Unbelievable Smart Worker & Hilarious Fails | Construction Compilation #7 #adamrose #smartworkers
▶︎
Emco Compact 5 Lathe Tutor Control Panel & Programming
▶︎
I Built Retracting Casters that are Actually GOOD
▶︎
QCTP Tool Holder For The Lathe
▶︎
This Abandoned Fadal CNC Was a Total Mystery… Until I Powered It On
▶︎