Instalacja napędu do bram skrzydłowych ETM-01 Fortis LS – Siłownik z mechanicznymi krańcówkami

Welcome to the Elektrobim channel! 👋 In this episode, Arek will show you step-by-step how to install our new ETM-01 Fortis LS drive – a fast, robust, and easy-to-install swing gate operator with mechanical limit switches. 🚀 Why is this so important? The mechanical stops built into the motors completely eliminate the need for additional stops – both when opening and closing the gate. Furthermore, you can conveniently adjust the opening angle after the motor is installed, making installation and subsequent adjustments to the drive's operation much easier. The ETM-01 Fortis LS drive supports gates up to 3 meters long and weighing up to 300 kg. Thanks to its high extension speed, the gate opens in just a few seconds. It's perfect for both airy and partially enclosed gates. In this video, you'll see the complete installation process – from preparing the wiring and marking the mounting points, through the installation of the actuators, photocells, the lamp, and the control unit, to the initial start-up and safety tests. What will you learn? How to prepare the gate posts and leaves for drive installation How to determine mounting points using the installation calculator Installing handles, actuators with mechanical limit switches, photocells, and the indicator light Connecting and initially configuring the ETM-DG2 control unit Checking the operating direction, adjusting the opening angle, and performing safety tests What will you need? ETM-01 Fortis LS swing gate operator mounting point calculator basic tools: drill, screwdriver, wrenches, rivet nuts or screws wiring for actuators, photocells, and lamps 🔗 Useful links: 👉 ETM-01 Fortis LS swing gate operator: https://www.elektrobim.pl/302541-nape... 👉 Mounting point calculator: https://www.elektrobim.pl/kalkulator/ 👉 Looking for an installer? https://www.elektrobim.pl/monterzy-or... 💡 If you'd like more instructions and guides, subscribe to our channel and leave a comment – we'd be happy to answer your questions! Table of Contents: 00:00 Introduction 00:29 Presentation of the ETM-01 Fortis LS drive – features and capabilities 01:10 Preparing the wiring on the posts 01:40 Determining the actuator mounting points 02:07 Measuring the actuator – L1 and L2 dimensions 03:02 Mounting the actuator mounting bracket on the post 04:00 Mounting the bracket on the gate leaf 04:35 Installing the actuator on the gate 06:15 Mounting the FK-02 photocells 08:00 Mounting the LS-K warning light 08:28 Mounting the ETM-DG2 control unit 09:28 Connecting the actuators to the control unit 10:09 Connecting the warning light to the control unit 10:33 Connecting the photocells to the control unit 11:00 Connecting the 230V power supply to the control unit 11:47 First start-up – test and Modifying the actuators' direction 13:05 Checking the operation of photocells and safety 13:42 Final result 14:22 Summary 14:59 Behind the scenes ;)