Configuration d'une route statique pour débutants

Configuring a Static Route In this video, we'll discuss how to configure a static route. To configure a static route on a Cisco router, you need to use the "ip route" command. Here's the general syntax for this command: ip route [network destination address] [subnet mask] [outgoing interface IP address] For example, to configure a route to the 192.168.2.0/24 network via Ethernet interface 0/1, you can use the following command: ip route 192.168.2.0 255.255.255.0 Ethernet 0/1 You can also use the "ip route" command with the "persistent" option so that the route remains active even after a router reboot. For example: ip route 192.168.2.0 255.255.255.0 Ethernet 0/1 permanent It is also possible to configure a default route that will be used for all packets that do not match any other route configured on the router. To do this, you can use the command "ip default-gateway" followed by the IP address of the outgoing interface: ip default-gateway 192.168.1.1 This configures a default route to the Ethernet 0/0 interface with the IP address 192.168.1.1. #ccna #static_route #2y.technology