How to apply 1K enamel by spray gun

A quick how-to video demonstrating how to apply 1k enamel with a spray gun. We are using our Ultraspeed Enamel in this clip. To apply 1k by spraying it will need thinning but only by around 5-10%. Mix well and spray using around 40psi onto a test piece. Ideally use a nozzle size between a No 14 and 16. If the result looks uneven and ‘bitty’ then you have not quite thinned it enough. A side effect will probably be very little spray dust coming from the gun as well. To rectify add a little more thinner, mix well and try again. We have guides on product application here - https://paintman.co.uk/help-and-info/ Products used: Pastel Green Ultraspeed Enamel Paint: https://paintman.co.uk/shop/land-rove... Green undercoat: https://paintman.co.uk/shop/choose-yo... Prep Clean: https://paintman.co.uk/shop/prep-clea... Thinners: https://paintman.co.uk/shop/thinners-... Tack cloth: https://paintman.co.uk/shop/prep-clea... Masking Paper: https://paintman.co.uk/shop/hand-mask... Masking tape: https://paintman.co.uk/shop/masking-t... Wet and Dry paper: https://paintman.co.uk/shop/wet-dry-p... Scotch Brite pads: https://paintman.co.uk/shop/scotch-br...