Opel Calibra V6 TA02 Build Series - Manual Overview

It's time to start building a new car! - In this video we will go over the manual of the LIMITED EDITION Opel Calibra V6 on the TA02 Chassis by Tamiya. This is a great looking car and I can't wait to start building a TA02 Chassis! For this first video we'll take a quick look at everything we are going to need to do and add one must have upgrade right from the start! I had a request to do an in depth build of this car so that's exactly what I'm going to do! So right off the bat, if you are planning on building this car with me, do get yourself a set of ball bearings to start with. You'll thank me later :) I wish you all much success in building your car and as we go through these instructions if questions come up or you need more clarity on anything, please feel free to reach out. I'll be glad to help. PLEASE TAKE NOTE! In most Tamiya kits the grease that is supplied is USUALLY enough and in most cases I'll even have a little extra left over. And for someone like me who likes to be fairly liberal with the application of grease, there is plenty of grease in the kit. HOWEVER...this kit does NOT come with enough grease in my opinion. So...you may have to order extra grease or just don't use as much as I do. As I ran out of the kit supplied grease by step 14, I had to order more. So in step 14 you'll see me using a brand new BIG TUBE of Tamiya Cera Grease that I ordered to complete the kit. Here is a direct link to a tube of Cera Grease from Amazon: https://amzn.to/3pGl8B4 Note: The above link is an affiliate link so I will earn a little commission from this which does help fund the channel. Thank you!