Power Rack Cable Attachment, First Option - DIY Duke

Here is one option to adding a Cable Attachment to your Power Rack. I will also have another one soon where I welded certain parts to this Attachment for those who are interested in that. Also, here is the UPDATED list of items needed for this project.... 14' of 1/4 " Vinyl wrap steel cable 6 1/4" cable clamps 4 1/4"x4 bolts 4 1/4" nuts 8 1/4" washers 6 1 1/4" #8Torx wood screws 4 3/4" x 1/4" sheaves 4 1/2" x 1/4" Bolts 4 1/4" Nuts 2 2" Overhead Pulleys 2 1 1/2" Overhead Pulleys 2 Snap Spring Clips 4" 1 7/16 x 3" U Bolt 4 7/16 nuts Drill 1/4" Drill Bit 7/16 Drill Bit In addition, to properly install the cable clamps, make sure the saddle of the clamp ( the part where the nuts are ) is on the long ( live ) end of the cable. All should be facing the same direction to ensure proper strength. Sorry about that!