IH Clearance Truck Light Lens Removal

IH Clearance Truck Light Lens Removal - Removed lens to replace bulb inside on my 1975 IH D200 Dump Truck. The process involved Wetting the O-ring inside the lens with oil. Spin lens cover to break seal between housing and lens. Next step was using a pry bar/small screw driver to lift up one side and slip a zip tie under lens edge. Fourth step was to pry on other side of lens and slip another zip tie under lens edge. Last step pry on the first side lightly and the lens should pop out. Process works the lens back and forth to get the lens to pop out. Sharing my process to hopefully help others! No Audio FYI. Video Time Stamps: 00:00 - Wet O-Ring/Gasket with Oil 00:11 - Spin lens cover to break seal between housing and lens 00:21 - Use Pry Bar to lift up one side and slip a zip tie under lens edge 00:32 - Pry on other side of lens and slip another zip tie under lens edge 00:57 - Pry on the first side lightly and the lens should pop out.