Model A Ford - preflight checklist for new head installation

This video will help you with some preparatory steps to take before installing a new cylinder head on your Model A Ford. I tried to put the best information I have into a reliable procedure that anyone can do. Disclaimer: This is one way to preflight your flathead install, it is not the way. I'm certain I've made mistakes and left out important information. Chapter Headings 0:00 Introduction 0:44 Step 1: Acquire new cylinder head and gasket 2:13 Step 2: Resurface and paint the new head 3:11 Step 3: Remove the old head and gasket 4:19 Step 4: Check and clean stud holes 6:33 Step 5: Check for damage and witness marks 14:37 Step 6: Check for flatness 19:34 Step 7: Check for blocked coolant passages 22:15 Step 8: Check for adequate piston-to-head clearance 37:36 Step 9: Check distributor fit 38:08 Step 10: Check your parts and supplies 39:42 Wrap-up The more unusual tools you'll need for this checklist are a precision straightedge, feeler gauges, a deck bridge, and a dial indicator. The remaining needed tools should be stuff you already have around the workshop.