DF Models Z10 funktioniert nicht mehr ? Wir KALIBRIEREN und BINDEN NEU !

Today we'll be looking at binding and calibrating the RACE X3 radio remote control. It comes standard with the Z10 series from DF-MODELS, for example. ⬇️Binding instructions here https://www.df-models.info/Download/A... ⬇️Calibration instructions First step: Set the servo reverse switch to "ST" on the left, not "R". Second step: Turn the steering wheel to its maximum right position and the throttle stick to maximum forward/full throttle, and hold it down. Third step: Turn on the transmitter; the transmitter LED will blink slowly. Fourth step: Release the sticks. Fifth step: Turn the steering wheel to its maximum left position, then to its maximum right position. Set the throttle lever to the forward maximum position/full throttle, then to maximum brake. Sixth step: Move the "ST" switch to the right "R" to exit calibration mode and save the calibration parameters; the calibration is complete. ⬇️The Z10 in all its glory    • Video   ⬇️Unboxing    • Z10 DF-MODELS - UNBOXING - Der perfekte Tr...   I hope I was able to help you, and if you have any further questions, just comment and ask right after liking 😜☺️✌️. ⬇️Battery burning? We've experimented and tested products for safety, better safe than sorry!    • FIRE CASE TEST, verbrennt das HRC FireCase...   ⬇️Here's where you can find HRC FireCases. https://www.hrcdistribution.com/rc/pr... Don't miss any more videos 👨‍💻, subscribe to the channel 📍, support me with comments ⌨️ and likes 👍 for the YouTube algorithm 📊, activate the bell 🔔, and see you next time 🇩🇪✌️ RCRockandSand