Полная замена масла в коробке 0D5 на Audi A6 C8 (4K). ZF 8HP65 - Замена масла в АКПП

⭐️Telegram channel➡️ https://t.me/SuperMegaAvtoSlesar ⭐️Instagram➡️   / super.mechanik   ⭐️Tik Tok➡️   / artem_pankovich   ⭐️VK community➡️ https://vk.com/supermegaavtoslesar ⭐️Song in the video➡️ https://drive.google.com/file/d/1T57i... ⭐️Become a channel sponsor and you will get access to exclusive bonuses. Learn more➡️:    / @artempankovich   Today we're working on a 2019 Audi A6, C8 body style, Audi designation 4K. The car has 107,000 kilometers on the odometer. In this detailed video, we'll perform a complete fluid change in the 0D5 automatic transmission—an 8-speed torque converter from ZF, installed in many VAG models. We'll show you step-by-step and clearly: — How to remove the oil pan and replace the oil filter — How to properly fill the oil — How to accurately set the working fluid level — What tools and consumables you'll need — What to look for during maintenance We'll also tell you a little about the 0D5 transmission itself: This is a modern and reliable unit that provides comfortable shifting and good performance. However, like any automatic transmission, it requires regular maintenance. The transmission's weaknesses include sensitivity to overheating, oil contamination, and late filter changes. The recommended oil change interval is every 60,000–80,000 km. With proper maintenance, the transmission will provide long and reliable service. It is important to monitor the condition of the seals, oil temperature, and proper shifting. Watch the video, comment, and share your experiences—this will help many owners of Audi and other VAG vehicles with the 0D5 transmission. Below are step-by-step instructions on how to change the oil in a ZF 8HP automatic transmission yourself: Drain the automatic transmission oil. Replace the automatic transmission oil pan filter. The selector lever should be in position P. The automatic transmission oil temperature should be below 30°C. Fill the transmission until automatic transmission fluid begins to drip from the inspection hole. Start the engine and let it idle. Add automatic transmission fluid until it begins to drip from the level hole. Reinstall the level screw. Shift into each gear several times, then move the selector lever to position P. Connect a diagnostic tool to check the fluid level. The automatic transmission fluid temperature should be 30–40°C. If the temperature is higher, allow the transmission to cool. Remove the level screw. Drain the fluid until it begins to drip. If no oil leak is visible: Add automatic transmission fluid until it begins to drip from the level hole. Reinstall a new level screw with a new seal. After watching this video, you will be able to perform the following operations yourself: Change the transmission oil Change the oil correctly Change the transmission oil Change the oil yourself Change the automatic transmission oil Check the transmission oil level Check the oil level correctly Partial automatic transmission oil change Complete automatic transmission oil change Change the automatic transmission oil Check the automatic transmission oil level Change the automatic transmission oil