First time setup of 2013 Jayco Sport 8 popup camper

This is our first 11 minutes with the Sport 8 camper. This camper had been sitting for at least a couple of years with no activity. The mud daubers had built many, many nests in the camper and, in fact, are the reason that the fan on the AC wasn't working during the video. After the video, I took the top off of the AC and manually got the fan going and knocked out a bunch of mud dauber nests inside the unit. Cordless drills: https://amzn.to/3JHtmyS Curt 4-pin to 7-pin trailer harness adapter: https://amzn.to/3niXBVG Master lock trailer coupler protector: https://amzn.to/42yRdcQ LED reverse light for trailer, 4 pack: https://amzn.to/3TAuDMV Spare tire covers: https://amzn.to/3nfuFxG Leveling blocks: https://amzn.to/3FMXaZX 3,000 watt generators: https://amzn.to/3njeQG3 Outdoor extension cords: https://amzn.to/3ZpWlNT Folding table/half grill: https://amzn.to/3lyxMAn 0:00 Intro 0:16 Crank up the top. Crank it up. Crank it up. 1:35 Put down the leveling feet in the back 2:45 Pull the rear bed out and install supports 3:35 Start the generator 4:43 Pull the front bed out and install supports 6:07 Pull out the stairs 6:22 Rotate sink and counter into place 7:24 Starting to deal with dinette and table 7:40 Trying to get the AC going 8:26 Removing dinette table 8:59 Installing supports to hold up canvas over beds 9:51 Removing door from ceiling storage and installing (As an Amazon Associate I earn from qualifying purchases.)