Bewegungsmelder Anschließen ✅ GENIALE ANLEITUNG: Wie für Unterputz & Innen an LED Lampe Anschließen?

Connecting a Motion Detector! How to Connect a Flush-Mounted & Indoor Detector to an LED Light? ✅DETECTOR*: https://amzn.to/2RaW28E ✅LAMP*: https://amzn.to/35ml1yq ✅CABLE STRIPPER*: http://amzn.to/2oAFEjn ✅INSULATION STRIPPER*: http://amzn.to/2CoYsLs In this video, you'll learn how to properly and professionally connect a presence detector yourself. Use these instructions to connect a motion detector and learn how to connect it to an LED light for flush-mounting and indoor installation. According to a test, Arduino and Steinel can even be easily bridged, so it doesn't matter whether you're using a 3-wire or 5-wire cable. The connection also works with 2-wire technology, for example, for a wall outlet. Of course, all of this also works with an outdoor light or retrofit outdoor light, but you should watch a separate video for setting it up, as there are also different controls for lux, sun, and moon symbols. The time for the lamps or lights can also be set differently. In a garage, mobile home, or even for stairs or stair lighting, you can install it this way during installation, and there's even the option for a mirror cabinet and LED strips. Such an outdoor light can also be retrofitted so that you always have a high-frequency night light, for example. So, how is it connected, and can it be easily installed and connected to an existing connection? Where should it be located, and which one do you need for tiles, a cavity wall, or even for furniture or in the wall? Inserting a connection isn't rocket science, just like installing and fastening. Only the wiring, clamping, and pulling of 230 V or 12 V cables requires practice. If you can, you can also install it in a damp room, such as the bathroom, kitchen, or even the living room and bedroom. I definitely recommend brands like Gira, Busch Jäger, Jung Berker, and Kopp, as they are simply safer than those from, say, Ikea, and in the worst case, electrical wiring can even cause a fire. This whole thing is dangerous, and you shouldn't expose yourself to that danger. After switching correctly, you have to measure the wiring again to verify. Checking with infrared is always preferred to simple testing and is safer for wiring. A motion sensor, like a motion switch or clap switch, is equipped with a motion sensor and not with radar. Connect a motion detector with this video guide (German & what to do?) / installation instructions / operating instructions / tutorial / tips & tricks on YouTube and learn how to properly connect it to an LED light for indoor and flush-mounted installation. ▬ Video Courses ▬▬▬▬▬▬▬▬▬▬▬▬▬ ✅Ultimate Water Saving Formula: http://bit.ly/2qdiwcr ✅Ultimate Electricity Saving Formula: http://bit.ly/2pHXH5q ▬ About this Channel ▬▬▬▬▬▬▬▬▬▬▬▬▬ Do you have a problem you'd like to solve yourself? Then you've come to the right place at ProblemLöserTV! Whether you want to connect a lamp, clean your bike chain, or refill your heater, my videos will give you the solution to your problem in no time, free of charge! ✅Subscribe to "ProblemLöserTV": http://bit.ly/2p0clJL ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ ● Disclaimer: The author assumes no liability for the topicality, correctness, completeness, or quality of the information provided. Liability claims against the author relating to material or immaterial damage caused by the use or non-use of the information provided or by the use of incorrect or incomplete information are fundamentally excluded. All offers are subject to change and non-binding. The author expressly reserves the right to change, supplement, or delete parts of the pages or the entire offer, or to temporarily or permanently discontinue publication thereof without prior notice. ● The links marked with an asterisk (*) are so-called commission links. If you click on such a link and make a purchase through this link, I receive a commission from your purchase. The price does not change for you. I purchased the products shown in the video myself and/or was not paid for the positive portrayal! All recommendations are based on my own experience and the result of intensive, personal use.