TALARIA Sting Pedal Kit Installation Video

www.kaniwaba.com https://www.kaniwaba.com/talaria-stin... PRODUCT INFORMATION Carefully designed Pedal Kit for the TALARIA Sting. What YOU get: Strong. Left and right side brackets are made of a single piece to stand drops and tough conditions! This pedal kit will NOT propel your ebike. It will only propel it IF the TALARIA Electronic Pedal Assist Kit Add-on is added in the future. A pedal kit that lets your rear suspension WORK. The original pedal kit is located directly on the rear swingarm, therefore it does not spring your weight... you will feel the difference immediately going over obstacles, plus the turning is greatly improved! Plug and Play pedal kit fixed to the frame! You just disassemble the existing side brackets and install the pedal kit. Easy setup. Adjust the kit to your bike using the stainless steel collars. You may easily change between pedals or footpegs. Just install the footpegs or the cranks without removing the pedal kit, you can also remove the spindle. You choose! Maintenance free. New design is maintenance free since it has sealed cartridge bearings. Brace bar. Also works as a brace bar Reduced wobble. No wobble, a common problem with the OEM kit. Cranksets compatible. This kit is compatible with JIS square tapered cranksets, no major crank offset is required. Aluminium made in order to reduce weight. With a weight of around 3 Lb (1.5 kg) it is lighter than the OEM kit. The spindle is made of stainless steel. Durable Materials. Parts made of aluminum and stainless steel. It will last a long time.