CNC MACHINE BORING TOOL SETTING - செய்து எப்படி இயக்குவது..?! Setting + Offset taking + operating

#shorts #shortsfeed #shortsvideo #youtubeshorts #shortstamil #tamilshorts #shortsstory #shortsviral #trendingshorts #viral 1. Use a properly calibrated touch probe: The first step to setting up a CNC boring tool is to use a properly calibrated touch probe. This ensures the accuracy of the measurement and helps to avoid errors. 2. Get the spindle and tool in position: Once the touch probe is in place and calibrated, the next step is to get the spindle and tool in position. Make sure the spindle is in the correct location and the tool is properly secured. 3. Set the Z-axis location: Use the touch probe to set the Z-axis location by touching it to the top of the workpiece or to a reference surface. This sets the starting point for the tool. 4. Set the tool length offset: Measure the length of the tool and enter this information into the CNC control software. This tells the machine how far the tool extends from the spindle, ensuring accurate cutting. 5. Set the tool diameter: Measure the diameter of the tool and enter it into the CNC control software. This allows the machine to accurately calculate cutting speeds and feeds. 6. Test the tool: Before beginning the actual machining process, it's important to test the tool to ensure everything has been set up correctly. This can be done by running a test program or performing a trial cut. 7. Make adjustments as needed: If the cut is not accurate, or if the machine is not performing as expected, adjustments may need to be made to the tool length offset or diameter settings. Re-test the tool after making any changes. ‪@vtlcncking7‬