Cura Grundlagen - Einstellungen 3D Druck - Anet A8 [GER, ENG SUB]

Cura download: https://ultimaker.com/en/products/cur... Anet shirts: https://www.spreadshirt.de/user/3dpri... START G-Code: G21 ;metric values G90 ;absolute positioning M82 ;set extruder to absolute mode M107 ;start with the fan off G28 X0 Y0 ;move X/Y to min endstops G28 Z0 ;move Z to min endstops G1 Z15.0 F9000 ;move Extruder 15mm in Z at a speed of 9000 mm/min G92 E0 ;zero the extruded length G1 F200 E3 ;extrude 3mm of feed stock G92 E0 ;zero the extruded length again G1 F9000 ;Sets feedrate for all subsequent moves on 9000 mm/min M117 Printing… ; Printing message will be shown on display END G-Code: M104 S0 ;extruder heater off M140 S0 ;heated bed heater off G91 ;relative positioning G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure G1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way M84 ;steppers off G90 ;absolute positioning