POWERMATIC MINI: Полный Обзор Машинки для Набивки Сигарет и Секреты Увлажнения Табака

Hello everyone! This video is a detailed review of the Powermatic Mini cigarette tube stuffer, and also contains lots of practical tips and personal "life hacks" on proper tobacco preparation and tube stuffing techniques. I've been using the machine for a month now, and it's very practical. It comes with a cleaning brush and instructions. The main difference is that the machine has plastic parts, so I don't recommend disassembling it yourself. Basic tips for upgrading and maintaining the machine: 1. Lubricating the mechanism: It's necessary to lubricate the white piston (slider) with oil to ensure smooth movement, as the parts are plastic. 2. Cleaning the inlet: It's essential to clean the inlet to ensure it's not clogged, otherwise the cigarette won't pack. 3. Reinforcing the tip: It's recommended to remove the tip where the tube is inserted and glue it in place, as it can become loose over time. 4. Improving the sleeve clamp: Glue a piece of thick fabric to the inner clamp (which holds the sleeve). This will eliminate play and allow the machine to hold the sleeve firmly, preventing tearing. Tobacco preparation is key. The tobacco should be medium-grain. It should be slightly moist (around 20% moisture), not overly dry, otherwise the cigarette will fall out. I suggest three methods for moistening the tobacco: 1. Spraying: Use a regular sprayer. You can add a little cognac or another drink to give the smoke a more pleasant aromatic aroma. 2. Fruit/Vegetables: Place sliced ​​apple or potato wedges in the tobacco jar. It's important not to over-saturate the tobacco: about an hour maximum, or the tobacco will become too moist. 3. Natural Humidification: Place the tobacco in the box and place it on the windowsill with the window open for about an hour (in cool weather) so that it absorbs moisture from the air. Packing Technique (Step by Step). 1. Checking the Piston: Make sure the piston is in the extreme position. 2. Loading the Tobacco: Place two pinches of tobacco in the window. 3. Even Distribution (Important Life Hack): Without pressing too hard with your finger, carefully go along the channel. This is necessary so that the cigarette is packed evenly and there are no empty spaces near the filter. 4. Compacting the Edge: Use your finger to gently push the tobacco to the edges to make sure that the area near the filter is packed. 5. Putting on the Tube: Place the tube onto the tip. 6. Closing the Lid: Close the lid until it clicks so that the knife cuts off the excess tobacco and the shutter clamps the tube. 7. Packing: Move the piston back and forth until it stops. 8. Final finishing: After packing, tap the cigarette on the surface so that the tobacco is compacted and does not spill out.