cara mengganti logo pada tv cina Wcom dengan cepat

In the AV position, press the code 2483 or 6483 or 6568/8600/4683 or 6597, 5368. To set the logo, use the menu, prog, +/-, and vol +/- buttons. To save, press the disp button once. Chinese TV can't receive broadcasts    • Trik awal memperbaiki tv cina tidak bisa n...   1. TANAKA OR THOSE USING THE 8873 PROGRAM IC (TOSHIBA) In the factory setting, select the F7 menu. Use the mute button to select the P-SET screen. To set the logo, use the menu, prog +/-, and vol +/- buttons. To save, press the sleep button once. To exit factory mode, press the menu button twice. 2. WANSONIC In AV mode, press 2483 or 6483 or 6568. To set the logo, use the menu, prog, +/-, and vol +/- buttons. To save, press the disp button once. 3. HUIJIA///IC LA76810 In factory mode, press the vol- button to the minimum. Then press the vol- button (hold), then press prog-. To set the logo, use the pp, prog, and vol buttons. To save, press the recall button (s) once or press the factory button repeatedly until it exits. 4. MASDA In factory mode, press the pp button for 3 seconds. To set the logo, use the "PP", "P(+-)", and "V(+-)" buttons. To save, press the DISP button once or press the Factory button repeatedly until it appears. Factory Logo Display Menu TOS-1-IC Wan Sonic: OPT-LOGO ~ L1/2 ON-LOGO ~ L1/2 LOGO.BG ~ BLACK FULL BG ~ BLUE FULL BG BRI. ~ -00 OSD THEME ~ 00 OSD SHADOW ~ ON SCREEN SAVER ~ L1/2 The Factory menu above is the default factory menu for the Wan Sonic machine kit. To change the Logo Display to your name, press the button on the remote control in the position: OPT-LOGO ~ L1/2. The following display will appear on the television screen: WAN SONIC To change it to your name, edit the text. After editing, press DISPLAY. • Service Menu 1 using LA76810-PTS302, PTC1202-01, TA8690. • Press MENU on the TV and SLEEP on the remote control. • Press SLEEP 3 times to save data and exit the Service Menu. Akira LC863324A LA76810 • Press “PROG” followed by pressing 6483 on the Remote Control, repeat to set “white balance, factory mode, exit. Normal voltage of IC pins 8873/8891/8893/8895: Pin 1: U/V = 0v. Pin 2: L/H = 0v. Pin 3: key = 4.9v Pin 4: Gnd. Pin 5: Reset = 4.9v. Pin 6: X tall = 2.1v. Pin 7: X tall = 2.1v. Pin 8: test Gnd = 0v. Pin 9: VCC = 5v. Pin 10: vss Gnd = 0v. Pin 11: TV Gnd = 0v. Pin 12: FBP in = 1.2v. Pin 13: H out = 2.1v. Pin 14 : H AFC = 5.1v. Pin 15: V saw = 4.1v Pin 16: V out = 4.5v. Pin 17: H vcc = 8v. Pin 18 : tv Gnd Pin 19: CB = 1.7v. Pin 20: Y in = 2.1v. Pin 21: CR = 1.8v. Pin 22: Ext aui R = 3.5v. Pin 23 : C in CVBS2 in = 0v. Pin 24 : Y or CVBS1 in = 2.5v. Pin 25: ALG/ EW out = 0v. Pin 26: tv in = 3v. Pin 27 : ABCL = 4.8v. Pin 28: audio out1 = 3.1v. Pin 29: audio out2 = 3.1v. Pin 30: tv out = 4.1 v. Pin 31: SIF out = 2.8v. Pin 32: Ext aui L = 3.5v. Pin 33: SIF in = 2.4v. Pin 34: DC NF = 2.8v. Pin 35 : PIF-PLL = 2.3v. Pin 36: IF vcc = 5v. Pin 37: S reg = 2.1v. Pin 38: audio out1 = 3.1v. Pin 39: IF AGC = 2.1v. Pin 40: IF Gnd = 0v. Pin 41: IF in = 2.2v. Pin 42: IF in = 2.2v. Pin 43: RF AGC = 4.1v. Pin 44: Black detect = 3.5v. Pin 45: Ext audio 2 R = 4.5v. Pin 46: APC FIL = 2v. Pin 47: YC VCC = 3.3v. Pin 48: R out = 1.2v. Pin 49 : D vcc = 3.3v. Pin 50: R out = 1.2v. Pin 51: G out = 1.3v Pin 52: B out = 3v. Pin 53 : Gnd Pin 54 : Gnd Pin 55: Vcc = 5v. Pin 56 : SAV/RW AV/TV= 0v. Pin 57 : SDA = 4.5v Pin 58: SCL = 4.6v. Pin 59: UHF/50/60HZ= 0v. Pin 60: VT = 4.7v. Pin 61: MUTE = 3v. Pin 62 : SYNC/LED AV2/DVD = 4.2v. Pin 63: IR in/remote in = 2.1v. Pin 64: on/off -on : 0v -off : 4.8v. Chinese TV IC 8893 can it be replaced with 8823 = very possible. #mininchannelservice