Part 6 - Attaching the coax - G3TXQ Hexbeam by MW0JZE

Well done you have finished assembling the Hexbeam by MW0JZE. Final step before mounting the Hexbeam is to fit the feedline. Any type of 50Ohm coax will be fine. Make sure that you use some sort of 1:1 Balun. In this clip I use my custom built FT-240-43 torriod with 8 turns of teflon coax potted with Polyester resin. You can use 6 to 8 FB31-1020 beads just slipped over any 10mm OD coax such as RG213 or similar.