Hör auf mit sinnlosem Infill! So werden dünne Teile unzerstörbar! | Slicer Samstag #14

*3D Printing Academy: https://www.3dd-akademie.de – Become part of the community! *Discount code: Use the code "Lion" and save 10% on your membership permanently! Are you familiar with this problem? You print a part, and as soon as you use a clamping mechanism or apply any pressure, a pin or stud simply breaks off. Often, this isn't due to the material itself, but rather the internal structure. In this episode of Slicer Saturday, I'll explain how you can solve this problem once and for all with the "Minimum Infill Threshold." *If you'd like to order something from Anycubic, please use my link: https://de.anycubic.com/?ref=lionsart... *€15 discount on orders over €200 with the code: lionsartworld ⏱️ Chapters / Timestamps 0:00 Introduction: Why do parts break off? 0:32 Welcome to Slicer Saturday & Sponsorship 1:13 Infill vs. Wall Thickness: Identifying the Problem 1:44 The Solution: Minimum Infill Threshold Explained 2:09 Practical Check: How It Looks in the Slicer 3:20 How the Slicer Calculates the Area 4:03 Bonus Tip: Print Faster & Avoid Zigzags 5:13 Example: Optimizing Narrow Areas 5:55 Conclusion & Your Experiences My Equipment 🛒 *My Camera: Sony Alpha ZV-E10: https://amzn.to/420rxre 🛒 *My Second Camera: DJI Osmo Pocket 3: https://amzn.to/4r3y137 🛒 *My Microphone: DJI Mic Mini: https://amzn.to/4hxctWC 📜 FTC DISCLAIMER All links or discount codes marked with * in the description My videos contain affiliate links, which means I receive a small commission on any purchases you make through these links. There are no additional costs for you; it's simply another way to support me and my channel! :-)