CONECTOR XLR-3 CANNON - SOLDADURA explicada paso a paso en tiempo real y con consejos
This video describes the parts of the XLR-3 connector and their assembly order on the cable when soldering: 1 - Bushing 2 - Chuck strain relief 3 - Insert base or connector with pins (Insert) 4 - Housing XLR-3 Connector - Parts, assembly order, and pinout • CONECTOR XLR-3 - PARTES, ELEMENTOS, ORDEN ... BEFORE SOLDERING THE CONNECTOR, WE MUST INSERT THE CAP ON THE CABLE. If we forget, we will have to desolder the connector to insert it. We must do the same with the strain relief if it is not open. Then we strip the PVC from the cable (no more than 1 cm), cut the protective textile strands, and join all the copper braid strands together until they form a uniform assembly. Next, we strip the insulation from the conductors a couple of millimeters and join their copper wires. Next, we tin-plated the XLR connector pins: 1 - Shield (eXternal, shield) 2 - Positive (Live) 3 - Negative (Return) Next, we tin-plated the connector pins. Now, we solder the conductors and the shield to the connector pins. First, we solder the shield, which should be slightly shorter to absorb any potential strain and prevent it from being pulled away by the signal conductors. Then, we solder the two signal conductors. Finally, we'll use a multimeter to check the continuity of the three soldered pins, which should make contact with the respective connector pins on the other end of the cable. Related Video - Measuring Cable Continuity and Solder Continuity on XLR-3 Connectors with a Multimeter • CONECTOR XLR-3 CANNON - COMPROBACIÓN de la... Tin Solder: http://amzn.to/2BEtls0 http://amzn.to/2BDcmWG http://amzn.to/2BBksPD (with resin core) http://amzn.to/2BBjnax (with resin core) Loose Neutrik XLR-3 Connectors Sold: MALE - http://amzn.to/2jP009Q FEMALE - http://amzn.to/2jQkWNx Audiobooks published by the author: EL LINE ARRAY Amazon Europe: http://amzn.to/2hSN6ag Amazon UK United: https://www.amazon.co.uk/El-line-arra... Amazon America: https://www.amazon.com/El-line-array-...

XLR-3 CANNON CONNECTOR - CHECKING CABLE AND SOLDER CONTINUITY WITH A MULTIMETER

How to Make XLR to Mono Jack Cable

How to Terminate Cat6 Shielded Cable with an RJ45 Connector

SPEAKER CABLE - 2.25 MM² SECTION - AWG 14 GAUGE - DO NOT USE ELECTRICAL CABLE

CONECTOR JACK PLUG TRS - PARTES - SOLDADURA paso a paso en tiempo real

How to make XLR to TS Cable

💥 FLUX ... the SECRET of GASLESS WELDING!

How do I make my own microphone cables with XLR connectors?

The Insane Genius of a Formula 1 Gearbox

SPEAKON CONNECTOR NL2 and NL4 - 1. PARTS AND ASSEMBLY - HOW TO SCREW THE SPEAKER CABLE

This Ancient Man Myth Became a HUGE Side Quest | MythBusters

Soldering 1/4 inch TRS Connectors Like A Pro

MINIJACK TO TWO XLR-3 CANNON CABLE - PINOUT - CORRECT AND IMPROPER USE

Terminating/Testing Network Cables - CAT 3, CAT5, CAT6, CAT 7, CAT 8

Bought a Broken CNC Lathe They Don’t Want Me to Fix

How to make a Canon (XLR) to ¼" Plug (TRS) Microphone Cable

Soldando cabo xlr para p10 mono #solda #eletronica

Cable Lugs: They Look Right. They're Not.

10 worst mistakes when soldering with a soldering iron

