2 NEW FAST KONE MonoSpace 500DX (EcoDisc) MRL Lifts in Car Park

Timestamps: 0:00 intro 0:23 normal ride 3:20 control cabinet 4:40 car top / lift shaft / motor These lifts are situated in a brand new overground car park for a factory. The car park consists of two halves that are offset by half a floor. Both sides are connected by two concrete building cores along the center axis, each containing a staircase and two lifts. The ground floor is the only floor served by both lifts. The left lift serves the even floors and only has one door side. The right lift serves the odd floors, which are offset upwards by half a floor compared to the even ones. It needs two door sides as the odd floor part of the car park is on the other side of the building core. This constellation leads to both lifts having the same travel height and number of full floors. The choice for the lifts in this car park fell on the Kone MonoSpace MRL. The MonoSpace 500DX is the medium variant of the MonoSpace DX line. The lifts installed have a speed of 1.75m/s which is the highest speed available for the MonoSpace 500DX variant. Manufacturer: Kone, 2022 Capacity: 13 persons / 1000 kg Type: Traction, 2:1 roping Floors Left: 11: -2, EG, 2, 4, 6, 8, 10, 12, 14, 16, 18 Floors Right: 12: -1, EG, 1, 3, 5, 7, 9, 11, 13, 15, 17, 19 Fixtures: Kone KSS 280 Speed: 1.75 m/s Travel height: 27.5m Logic: Kone KCE Drive: Kone KDL 16S Motor: Kone EcoDisc NMX11, 10.1 kW WARNING/DISCLAIMER: DO NOT attempt to copy anything shown in the video without having the proper knowledge of how to do so! LIFT SHAFTS and MACHINE ROOMS are very DANGEROUS places and are NOT MEANT to be accessed by inexperienced or untrained personnel! Dangers in these environments include but are not limited to crushing, electrocution, falling and burns. Recording: Q4 / 2022