Benefits of using Micropitch Transfers by Multi-Conveyor

Micropitch transfers are basically a “powered deadplate”, designed to allow for seamless end-to-end transfers of small profile, top-heavy, or uniquely shaped products that may stall, wedge, wobble or tip on a standard fixed transfer deadplate or roller transition. When two conveyors need an end-to-end transfer, LBP (low back pressure) transitions are typical. However, some products can stall using this method, ultimately waiting for the next product to push it over the transfer. It was for this very purpose that this micropitch transfer was created. The device is basically a miniature conveyor with a very tight nose bar put in place to interface two separate belting types or technologies. Micropitch transfers are also specified as end units on retractable noser conveyors. One application shows how transfers were placed after an incline friction chain, prior to a dual lane product turner, and then post-turner where product transfers to standard table top chain. Another application needed a micropitch transfer after a vibrating settling conveyor, that merges to table top chain, diverts, then micropitch transfers onto sideflexing grip chain for an incline ahead. One image even shows the micropitch transfer beneath an overhead hold down rail with locking pin. The most effective way of incorporating this technology is by preplanning the use of the micropitch in the original conveyor design. An afterthought approach is far more costly, and may require line extensions or add-ons. This transfer technology may be difficult to retrofit to original designs if incompatible belt widths were used or transfer space is insufficient. Learn more about micropitch transfers, pop-up transfers, LBP transitions and more on our website by visiting https://www.multi-conveyor.com. Then, call us at 1-800-236-7960. Remember, Multi-Conveyor … your best, conveyed better.