Arri 16s Battery Pack with Replaceable Cells

How to build your own battery pack for the Arri 16s 16mm camera utilizing replaceable cells. Files for 3d printing can be downloaded here: https://github.com/Pluriboom/16mm-bat... The Repository for the files is here: https://github.com/Pluriboom/16mm-bat... If you would like to purchase one of these packs instead: https://pluriboom.com/ Parts List: 8 x M3 8mm allen head screws 2 x M3 8mm tapered allen head screws 2 x M3 nuts 8 x M3 Threaded inserts for 3d printing (I prefer Ruthex brand) 1 x 4 pin Female XLR chassis mount jack (Neutrik is best quality - the files are modeled after the Neutrik NC4FP-1 - so if your jacks match he dimensions in the datasheet - they should work fine) 8 x Battery Contact Spring Solder Lug (SN-T5-1 at Digi-Key: https://www.digikey.com/en/products/d...) 8 x Battery Contact Solid Solder Lug (SN-T5-2 at Digi-Key: https://www.digikey.com/en/products/d...) 6 inches of 5mm silver strips OR an equivalent amount of braided 22awg wire -- to join batteries in series Extra 22awg wire and heat shrink for protecting the soldering joints to the XLR jack.