MPC 1967 Pontiac GTO 400 1/25 Scale Model Kit Build Review MPC918

Grab your 1967 #Pontiac #GTO #ScaleModel kit right now using the links below! Autoworldstore https://www.autoworldstore.com/produc... Modelroundup.com https://www.modelroundup.com/1967-Pon... The Pontiac GTO is an automobile that was manufactured by American automobile manufacturer Pontiac from the 1964 to 1974 model years, and by GM's subsidiary Holden in Australia from the 2004 to 2006 model years.The first generation of the GTO was a muscle car produced in the 1960s and the 1970s. Although there were muscle cars introduced earlier than the GTO,[1][2] the Pontiac GTO is considered by some to have started the trend with all four domestic automakers offering a variety of competing models.[3][4]For the 1964 and 1965 model years, the GTO was an optional package on the intermediate-sized Pontiac LeMans. The 1964 GTO vehicle identification number (VIN) started with 82, while the 1965 GTO VIN started with 237. The GTO became a separate model from 1966 to 1971 (VIN 242...). It became an optional package again for the 1972 and 1973 intermediate LeMans. For 1974, the GTO optional package was offered on the compact-sized Ventura.The GTO was selected as the Motor Trend Car of the Year in 1968.The GTO underwent a few styling changes in 1967. The louver-covered taillights were replaced with eight tail lights, four on each side. Rally II wheels with colored lug nuts were also available in 1967. The GTO emblems located on the rear part of the fenders were moved to the chrome rocker panels. The grill was changed from a purely split grill, to one that shared some chrome. The 1967 GTO was available in three body styles:Hardtop – 65,176 producedConvertible – 9,517 producedSports coupe – 7,029 producedThe GTO also saw several mechanical changes in 1967. The Tri-Power carburetion system was replaced with a single 4-barrel Rochester Quadrajet carburetor. The 389 cu in (6.4 L) engine received a larger cylinder bore 4.12 in (104.6 mm) for a total displacement of 400 cu in (6.6 L) V8, which was available in three models: economy, standard, and high output. The economy engine used a two-barrel carburetor rather than the Rochester Quadrajet and produced 265 hp (198 kW) at 4,400 rpm and 397 lb⋅ft (538 N⋅m) at 3,400 rpm. The standard engine produced 335 hp (250 kW) at 5,000 rpm; and the highest torque of the three engines at 441 lb⋅ft (598 N⋅m) at 3,400 rpm. The high output engine produced the most power for that year at 360 hp (365 PS; 268 kW) at 5,100 rpm and a maximum torque of 438 lb⋅ft (594 N⋅m; 61 kg⋅m) at 3,600 rpm [13][14][15]. Emission controls were fitted in GTOs sold in California.The 1967 model year required new safety equipment. A new energy-absorbing steering column was accompanied by an energy-absorbing steering wheel, padded instrument panel, non-protruding control knobs, and four-way emergency flashers. A shoulder belt option was also featured, and the brake master cylinder was now a dual reservoir unit with a backup hydraulic circuit.The two-speed automatic transmission was also replaced with a three-speed Turbo-Hydramatic TH-400, which was equipped with a Hurst Performance dual-gate shifter, called a "his/hers" shifter, that permitted either automatic shifting in "drive" or manual selection through the gears. Front disc brakes were also an option in 1967.[16]The GTO sales for 1967 totaled 81,722.