DIY Kayak Trolling Motor No Drilling Steering Control Arm
This is a DIY trolling motor steering control arm using 3/8 inch diameter threaded eye bolts (2) and 3/4 inch diameter split ring hangers (2). You can add a nut to lock the threaded section of the eye bolt against ring hanger if needed. The threaded sections of the eye bolts can be covered using polymer and/or metal tubing for a cleaner look. Note: Not all trolling motor shafts are the same diameter so get measurements before buying the split ring hangers.
▶︎
DIY Modified Malibu X Factor Kayak Trolling Motor
▶︎
DIY Kayak Trolling Motor Black Ops Steering Control Arm
▶︎
Kayak Trolling Motor Steering and Speed Control - BREAKDOWN & HOW IT’S MADE!
▶︎
Kayak Cable Steering Tube Guide
▶︎
Kayak Rear Trolling Motor Cable Steering Set Up
▶︎
D.I.Y kayak trolling motor steering and lift, perception outlaw 11.5 modification
▶︎
Redesigned trolling motor DIY lift system.
▶︎
Kayak outriggers, very strong, cheap and they work!
▶︎
Kayak Trolling Motor Steering Arm and other improvements!
▶︎
Universal Vessels Steering Triangle Control Arm Review
▶︎
✅ The Best No Drilling DIY Kayak Trolling Motor Mount
▶︎
DIY KAYAK TROLLING MOTOR FULL RC 2025
▶︎
DIY - Kayak Trolling Motor Raise System | Avoid Weeds with a Trolling Motor
▶︎
EASY KAYAK MOD || TROLLING MOTOR RUDDER || Sharper Steering
▶︎
Killer Mod to Easily Raise and Lower a Trolling Motor on your Fishing Kayak
▶︎
Revolutionize Your Kayak Trolling Motor with PWM & 3D Printed Tilt Lock Release!
▶︎
Pelican Catch Trolling Motor and Pedal Steering
▶︎
DIY Kayak Trolling Motor Steering (NO DRILLING)
▶︎
Kayak Trolling Motor Foot Steering: The Ultimate DIY Upgrade
▶︎