How to Replace Serpentine Belt Idler Pulley 2007-2013 Mini Cooper

Shop for New Auto Parts at 1AAuto.com https://1aau.to/c/178/ar/drive-belt-p... This video shows you how to replace your noisy pulley with a new TRQ one on your 2007-2013 Mini Cooper. That squealing noise coming from your vehicle’s engine compartment could be a slipping belt, or it could be a bad pulley bearing, or both. A bad pulley could eventually damage the belt, which could create even further damage. This repair was done on a 2012 Mini Cooper Base 1.6L Hatchback 2-Door FWD Manual and the process should be similar on the following vehicles: 2007 Mini Cooper 2008 Mini Cooper 2009 Mini Cooper 2010 Mini Cooper 2011 Mini Cooper 2012 Mini Cooper 2013 Mini Cooper Tools you will need: • Phillips Head Screwdriver • Pocket Screwdriver • Pry Bar https://1aau.to/oxI/1AXAA00020 • 10mm Wrench • 10mm Socket • 17mm Socket • T30 Socket Subscribe:    / @trq   Check out our playlist: Mini Cooper 2007-2013 2nd Generation:    • Mini Cooper 2007-2013 2nd Generation   📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. Note: As an Amazon Associate we earn from qualifying purchases.