Changer un kit chaîne moto de A à Z.

Here's a simple tutorial for changing your chain safely and easily! In order: Remove the gearbox output sprocket cover Clean the assembly Unfold the nut washer Press firmly on the rear brake Unscrew the nut with an extension wrench Cut the chain with an angle grinder Remove the rear brake Remove the wheel Remove the sprocket by unscrewing the nuts and clean everything Replace the new sprocket with the lettering facing you Tighten the sprocket nuts in a star pattern, applying threadlocker if necessary and tightening to the torque according to the RMT or the screw size Replace the wheel on the swingarm Attach the new chain to the old one Rotate the wheel to replace the new chain Install the connecting link of the new chain Place the washer with the new gearbox output sprocket ​​Tighten the gearbox output sprocket using the rear brake, torque approximately 125 newm Fold the washer over a piece of the nut replace the gearbox output sprocket cover adjust the chain tension (motorcycle travel between 30-35mm) tighten the wheel axle nut to 100 new meters and replace the cotter pin adjust the rear brake grease the chain and re-tension it after 250-500 km Thanks! Enjoy! Subscribe! Like! Comment! Thanks again and have a good weekend! :) Quentin