Build a Single Car Garage/Large Storage | Step-by-Step

An overview instruction on how to build a 200 sq. ft. large shed or One Car Garage. We chose to make it a garage to add more value to the property than a shed would, and many US cities do not require a permit for up to 200 sq. ft. Material List: 52 2x4 Pre-Cut Studs 92 5/8” length 18 2x4 @ 96”(8’) length 36 2x6 @ 96”(8’) length 52 feet length of pressure treated 2x4 20 feet length of 2x10 (Header) 40 feet length of 2x8 (Ridge Block) 10 sheets of OSB (4’x8’) 14 sheets of T1-11 siding plywood (4’x8’) 1 sheet of 3/8” plywood (for soffits) Scraps of 1/2” plywood for header sandwiches 600 sq ft of #15 felt paper (sides) 400 sq ft of #30 felt paper (roof) 80 ft of 1x3 primed SPF Trim board (for corners and garage door trim) 32 ft of 1x4 primed SPF Trim board (for corners) 40 ft of 1x6 primed SPF Trim board (for facia) 8 10’ sections of drip edge Gable vent 4 12’ Hardi board or other siding (10” wide) 14 packs of architectural shingles 1 pack of starter shingles 1 pack of ridge cap shingles 6 gallons exterior primer 1 gallon paint white for trim/eaves 4 gallons paint for exterior 1 gallon concrete sealer paint 14 j-bolts for concrete 3” sinker nails 2” siding nails 1 1/4” roofing nails assorted screws exterior caulk 36” Steel Door w/ pre made jamb 8’ by 7’ basic garage door