Kein Kaffee mehr? Saeco Royal Wasserpumpe einfach austauschen

Does your Saeco Royal Digital Plus stop brewing coffee after a few cups, does the pump get extremely hot, or does no water come out at all? That was exactly the problem with this machine: After servicing, it ran for three days until the aging Ulka pump completely failed. In this DIY tutorial, I'll show you step by step how to open the Saeco Royal, remove the defective water pump, install a brand new one, bleed the system, and safely reassemble everything. With this quick replacement, the machine will be ready for the next 20 years! 👉 Important when replacing the pump: Don't forget to bleed the system after installing the new pump so that it can build up pressure properly right away. 🛠️ Find suitable spare parts, pumps & maintenance kits for Saeco in my shop: ➡️ [INSERT YOUR WIX SHOP LINK HERE] Video chapters for a quick overview: 00:00 - Troubleshooting: Why isn't any coffee/water coming out? 00:35 - Opening the Saeco Royal & disassembling the housing 01:30 - Removing the old, defective water pump 02:25 - The problem: The pump is overheating and losing power 04:55 - Preparing and installing the new Ulka water pump 05:30 - Important intermediate step: Bleeding the system & checking for leaks 07:00 - Reassembling the housing and components correctly 09:10 - Final function test: It's working perfectly again! Did this guide help you save your Saeco Royal? Then please give the video a thumbs up and subscribe! If you have any questions about the renovation, I'll be happy to help you in the comments.