Modern Exterior Lighting Installation for Beginners

DIY Outdoor Wall Lights Modern Long LED Wall got for $30 each from Facebook Marketplace. It was missing bracket so I end up cut 2x4 woods to make a bracket and sealed. You can buy brand new one from Amazon I will put in the link below. Note: Before working on electrical, turn off your circuit breaker first. Consult your local electrician if you not famiilar with eletrical wirings to avoid injury and shock. Materials: Light: Amazon: https://amzn.to/3QvQaFW ( Mobile App support) Dusk to Dawn Sensor: https://amzn.to/3LtCz2Y Electrical Outdoor box: https://amzn.to/4aZ0EsS Electrical Wire: https://amzn.to/4aZ0EsS Helpful Guides • Aluminum or stainless steel rectangular tubing (for a modern look) • LED strip lights (waterproof, warm or cool white, or RGB) • Power adapter (suitable for outdoor use) • Clear acrylic or frosted diffuser (to soften the light) • Silicone sealant (for waterproofing) • Screws and wall anchors • Drill and screwdriver • Paint (optional, for color customization) • Wire connectors and weatherproof electrical box (for safety) Steps: 1. Design Your Light Fixture • Decide on the length and shape of your lights. A sleek rectangular fixture will give a modern touch. • Cut the metal tubing to your desired length. 2. Attach the LED Strip • Clean the inside of the tubing. • Peel and stick the LED strip along the length inside the tube. • Ensure the power wire extends from one end for easy wiring. 3. Install the Diffuser • Cut the acrylic or frosted panel to fit the open side of the tubing. • Secure it with small screws or glue to diffuse the LED light evenly. 4. Waterproof and Seal • Use silicone sealant around all openings to protect against moisture. • Ensure the LED strip itself is rated for outdoor use. 5. Mounting the Fixture • Drill mounting holes in the back of the metal frame. • Secure it to the wall using wall anchors and screws. • Run the power cable through a weatherproof conduit to protect it. 6. Connect to Power • Connect the LED strip wiring to the outdoor power adapter. • If hardwiring, use a weatherproof electrical box. • Test the lights before sealing everything permanently. 7. Final Touches • Paint the fixture if desired for a custom look. • Adjust the brightness or color settings if using a smart LED strip.