The ULTIMATE DIY Pull Up Bar Station (Build Video)

Here is a BUILD MONTAGE of my recent pull-up bar/gymnastics rings project! This video is not a DIY tutorial, but, hopefully, it inspires some people to indulge in home projects of this nature. I built this while renovating and had very limited access to tooling, so it gives a good indication of what can be made with not much more than a cordless drill and spanners. Obviously, the top section of the frame required welding, but you could just as easily build a straight frame and not need a grinder or welder! As for material etc, I just used square tube steel and bought it cut to size, the dual-bar itself I picked up for next to nothing second-hand, and the rest of the components were either lying around or from the local hardware store... All the best! 🚀 MECHANICAL & AEROSPACE ENGINEERING 🏗 SUBSCRIBE FOR QUALITY CONTENT 🇦🇺 SOUTH AUSTRALIA 📷 INSTAGRAM -   / eg_engineeringaustralia   DISCLAIMER: This video is for entertainment purposes only. It is not recommended that the content be replicated in any way. Use the information conveyed by EG Engineering Australia at your own risk. Under no circumstances will EG Engineering Australia be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by EG Engineering Australia or a third party. In no event shall EG Engineering Australia be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of EG Engineering Australia, it cannot guarantee against improper use or unauthorized modifications of this information. EG Engineering Australia assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EG Engineering Australia recommends safe practices when performing anything seen or implied in this video. Due to factors beyond the control of EG Engineering Australia, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not EG Engineering Australia.