LEGEND Bill Little Answers Your Toughest Performance Engine Questions!

We ask our good friend and one of YouTube’s favourite Performance Experts, Bill Little YOUR questions! Bill has been called Canada’s David Vizard; we hope to put the two of them together in the near future. If you haven’t already, please check out ‪@DavidVizard‬ ‘s channel featuring, the one and only DV and our good buddy Bil Jones ‪@FretGarage‬. Please check out our Summit Racing ‪@SummitRacing‬ affiliate link for all of your Performance and tool needs! http://summitracing.pxf.io/3koogM

$30,000 Wasted - The Replacement Diesel Engine Almost Ran Away!
▶︎

$30,000 Wasted - The Replacement Diesel Engine Almost Ran Away!

9500 RPM Small Block SCREAMS On The Dyno!!
▶︎

9500 RPM Small Block SCREAMS On The Dyno!!

The Youth Are Beginning To Rebel! Old Cars And The Analog Resistance
▶︎

The Youth Are Beginning To Rebel! Old Cars And The Analog Resistance

Ford Improved the 5.4 Triton… Then Made It Worse
▶︎

Ford Improved the 5.4 Triton… Then Made It Worse

How the hydraulic lifter works.
▶︎

How the hydraulic lifter works.

Your Headers Are A Waste Of Money!
▶︎

Your Headers Are A Waste Of Money!

The PERFORMANCE SECRET NO ONE Talks About! Torque Converters EXPLAINED Like You’ve NEVER Seen!
▶︎

The PERFORMANCE SECRET NO ONE Talks About! Torque Converters EXPLAINED Like You’ve NEVER Seen!

High Compression and Pump Gas - Can You? Should You?? Why Quench is Important
▶︎

High Compression and Pump Gas - Can You? Should You?? Why Quench is Important

BOLTS BREAKING HURT or KILLED TORQUING to FAILURE #bigblock #horsepower #smallblock #enginebuilding
▶︎

BOLTS BREAKING HURT or KILLED TORQUING to FAILURE #bigblock #horsepower #smallblock #enginebuilding

Cleveland vs Windsor — Why One Still Wins (5.045" Centerline Explained)
▶︎

Cleveland vs Windsor — Why One Still Wins (5.045" Centerline Explained)

Do SpinTechs Actually Flow? Dyno HP vs. Backpressure Test
▶︎

Do SpinTechs Actually Flow? Dyno HP vs. Backpressure Test

Ask Ed 51 | Why Ed Likes Rhoads Lifters + Piston Above Deck Machining Tips | Ed Smith with #BarryT
▶︎

Ask Ed 51 | Why Ed Likes Rhoads Lifters + Piston Above Deck Machining Tips | Ed Smith with #BarryT

What You Are Missing About Porting Heads
▶︎

What You Are Missing About Porting Heads

$500 REBUILD?!  SBC CHEVY For ONLY $500 YES! IT Can Be Done! Tight Budget?? NO PROBLEM!
▶︎

$500 REBUILD?! SBC CHEVY For ONLY $500 YES! IT Can Be Done! Tight Budget?? NO PROBLEM!

YouTube Pilot's Crash in Hell's Canyon Caught on Camera!
▶︎

YouTube Pilot's Crash in Hell's Canyon Caught on Camera!

Absolute JUNK? This 2023 Nissan Rogue 1.5L VC-Turbo Engine FAILED At Just 43,000 Miles!
▶︎

Absolute JUNK? This 2023 Nissan Rogue 1.5L VC-Turbo Engine FAILED At Just 43,000 Miles!

Steve Morris & I Built a 9,000 RPM 302 SBC... Will This Custom Intake Make More Power?
▶︎

Steve Morris & I Built a 9,000 RPM 302 SBC... Will This Custom Intake Make More Power?

Ford Could Never Outdo The Small Block V8...Until They Did With This INDESTUFCTBALE Motor
▶︎

Ford Could Never Outdo The Small Block V8...Until They Did With This INDESTUFCTBALE Motor

OILING! Small Block Vintage Chevy (Chevrolet) Motor - Ed Smith's Tricks of the Trade w #barryt
▶︎

OILING! Small Block Vintage Chevy (Chevrolet) Motor - Ed Smith's Tricks of the Trade w #barryt

Building An Evo 111 Crate Engine For Harley FXR
▶︎

Building An Evo 111 Crate Engine For Harley FXR