Statim G4 2000 2-Year PM Kit Part 3: Replacing the Solenoid Valve

This is part 3 in a series of videos we cut down to showcase the process of using your Statim G4 2000 PM Kit in steps. These steps will show you about the individual parts of your 2-year preventative maintenance parts that need to be maintained and/or replaced. In this part, we'll go over the replacement of the Solenoid Valve. The Solenoid Valve is one of the parts in need of replacement and/or maintenance after 2 years. You can find this 2-Year PM Kit for the Statim G4 2000 on our site using the link below: https://statimusa.com/product/scican-... If you have any questions, feel free to cal us at 704-966-1650, or you can check out our different programs using the links below. And if you have any questions about this issue or anything else, you can call us at 704-966-1650, option 3 for free tech support, or check us out using the links below: Our Free Tech Support Program https://statimusa.com/free-autoclave-... Our Free Virtual Technician Support https://statimusa.com/stanley-sterili... Our Free Preventative Maintenance Program https://statimusa.com/connect-with-us... Timestamps: 00:00 Intro 00:17 Remove the Solenoid Coil 00:35 Remove the Valve Stem 01:45 Clean the Stem 02:16 What's in the Valve Plunger Repair Kit 02:33 Remove the Old O-Ring 03:14 Insert the New O-Ring 03:21 Assemble the New Plunger, Spring and Valve 03:38 Install the Newly Assembled Solenoid Valve 04:08 Reinstall the Solenoid Coil and Clamp 04:27 Outro Free Use Music by OlexandrMusic https://www.olexandrignatov.com/freem...   / olexandrmusic      / olexandrmusic   https://www.olexandrignatov.com #sterilization #autoclave #scican