Монтаж профлиста (профнастила) на крышу своими руками

I chose C10 corrugated sheeting for the roof of my timber-frame house. The roof is designed so that the sheets don't need to be trimmed. We begin installation by installing a string. We line up the sheets along it so that their overhang relative to the bottommost batten is uniform throughout. This overhang is 70 mm. We install the first sheet. I can't do it alone, so I work with an assistant. It's very convenient to position the sheet standing on a platform. We screw in the sheets using 35 mm long colored roofing screws with a drill bit. We start screwing from the top down to prevent bulges. We install the last sheet from the ladder. Next, we install the 200x200 mm ridge cap. For convenience, we place a piece of folded cardboard under the "soft spot." Finally, we install the wind flashings in the same way as the ridge cap from the ladder. We screw in the ridge and wind flashings from above using 50 mm long screws. From the facade, the wind strip is screwed with a self-tapping screw and a 16 mm long press washer.