Safe isolation in-depth, essential information for AM2 AM2S AM2E 2391 #safe4september
In this video I go in-depth into how I deal with safe isolation, to help people at work, and the AM2. Because of the length of video you can skip to the parts you want to see. General considerations and chat about circuit finders 0min - 16:40s Safe isolation of a single phase circuit 16:40s - 28:28s Safe isolation of a single phase board 16:40s - 39:15s Safe isolation of a 3-phase circuit 39:15s - 54:46s Safe isolation of a 3-phase board 54:46s - 01:12:38s Recap 01:12:38s - 01:17:16s I’m this video I would like to primarily thank Test Instrument Solutions for donating the test equipment and lockout kit I was using, which will also be available to win in the new #safeisolation competition. Also used was a plug-in socket tester, and plug-in light adapters from Kewtech, supplied by Envision Electrical London. Lock off kit from Ideal industries Circuit finder and lock off kit from Martindale Everyone has the right to come home safely and I personally would argue that a full safe isolation kit, including lockout, and proving unit are an essential piece of PPE, and should be provided by employers under the Health and Safety at Work Act, as it states: Your employer must provide free of charge any equipment and protection necessary for you at work (such as clothing, shoes or boots, eye and ear protection, gloves, masks etc) and ensure it is properly looked after. It goes on to say... The employer should think about what could harm you at work, and do things that will stop anything that might harm you, they should provide you with the right tools and equipment to help keep you safe. The relevant regulations are the Personal Protective Equipment at Work Regulations 1992. Regulation 4 states: Every employer shall ensure that suitable personal protective equipment is provided to his employees who may be exposed to a risk to their health or safety while at work except where and to the extent that such risk has been adequately controlled by other means which are equally or more effective. For me that says it all.

Safe isolation procedures #am2 #electrician #electricalapprentice #electricaltraining #kewtech

Fault finding on a Ring Final Circuit using R1+R2 & R1+RN, the only way to prove polarity AM2 AM2S

AM2 and AM2S Hints and Tips for the Electrical Apprenticeship end Point Assessment.

Safe Isolation Procedure Lock out Tag out UK - Electrician Life

AM2 Assessments - DO's and DONT's ✍️

Electrical safe isolation procedure - Single Phase

Section E - Fault diagnosis and rectification - AM2 pre assessment manual

The Mysteries of AM2 and AM2S - End Point Assessment

Learning Electrical with Jim: Testing: Full Testing Video including filling out an EIC

RUSSIA WARNS EUROPE: YOU WILL PAY THE PRICE

10 Stages of Safe Isolation for a 3 Phase Distribution Board (3 Phase Supply) AM2 and AM2S

How to correctly terminate bonding straps - life hack. Also covers easy clamps from AM2

Live Incomer Tests at a 3 phase DB - AM2, AM2s, AM2e, 2391 Inspection and Testing Course

Safe isolation procedure

When Safe Isolation Isn't Enough - Deadly Diverted Neutral Current

Steel Conduit Bend, Set and Measure AM2s

City and Guilds 2365 Level 3 in Electrical Installation - High resistance fault

Safe Isolation

Safe Isolation of a 2 Way and Intermediate Lighting Circuit - How to Isolate Safely AM2 and AM2S

