2015–2023 Jeep Renegade 2.4L Engine Mount Replacement (Step-by-Step DIY)

In this video I walk through replacing an engine mount on the 2.4L Tigershark (MultiAir 2) Jeep Renegade. I cover safely supporting the engine, locating the mount, removing the old worn mount, and installing the new one with everything torqued back down. If you've been feeling a clunk on acceleration, a shudder at idle, or extra vibration through the cabin, a failing mount is a common culprit and this is a very doable DIY repair. This generation: This applies to the first-generation Jeep Renegade (BU), 2015–2023, including the 2019 facelift/refresh models — so 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, and 2023 Renegades with the 2.4L. Platform/sister vehicles (most direct match): Engine mounts are platform-specific, so the closest matches share both the platform and the 2.4L drivetrain with the Renegade: Fiat 500X 2.4L — 2016–2023 (true platform sister, built on the same FCA Small Wide platform) Jeep Compass (MP) 2.4L — 2017–2021 (same Small Wide platform family) If you drive a 500X or a newer Compass, your mount setup is very similar and this video should map over closely. Also runs the same 2.4L Tigershark engine (mount design may differ): These models share the engine but sit on different platforms, so the mounting may not be identical — still, the general procedure and concepts carry over: Jeep Cherokee (KL) 2.4L — 2014–2023 Dodge Dart 2.4L — 2013–2016 Chrysler 200 2.4L — 2015–2017 Ram ProMaster City 2.4L Always confirm the correct mount part number and torque specs for your specific year, trim, and transmission before you start. Search phrases: Jeep Renegade engine mount replacement, 2.4L Tigershark motor mount, Jeep Renegade clunk on acceleration, Jeep Renegade vibration at idle fix, how to replace motor mount Jeep Renegade, Fiat 500X engine mount, Jeep Compass 2.4 motor mount, passenger side engine mount Renegade, transmission mount Jeep Renegade, motor mount symptoms Jeep.