Chlorinator Off No Cell Power - DIY Repair

!!! IMPORTANT: Please read the full description for important safety information !!! !!! WARNING!!! (Shut Power Off At Main Panel!) !!! ** I would HIGHLY recommend going to the main breaker panel for the house and switching off the breaker that feeds power to the pool controller sub panel. ** To see close up photos of my board and additional information about GLX-PCB-MAIN board repairs please visit the support page on my website: https://fiveable.com/support/ How to easily repair a Hayward Goldline Aqua Plus salt water pool system that is giving a “Chlorinator Off No Cell Power” message. Minimum Tools Needed: 1) Screwdriver or socket driver that fits bolts on face plate and circuit board 2) Soldering Iron 10-25 watt should work fine 3) Electrical Solder with Rosin Core Timestamps: 00:00 Intro 00:23 The Problem 01:05 Turning Off 01:40 Disclaimer 02:07 At Your Own Risk! 02:18 Removing The Face Plate 02:36 WARNING!!! (Shut Power Off At Main Panel!) 03:42 Removing The Display/Control Panel 04:25 Removing The Circuit Board 05:12 Identifying The Bad Connection 05:48 Soldering Iron Information 06:14 Soldering The Bad Connection 06:47 Inspecting The Repaired Connection 07:10 Remounting The Circuit Board 07:46 Reinstalling The Display/Control Panel 09:12 Reinstalling The Face Plate 10:24 Plug The Cell Back In 10:36 Power Back Up And Check Messages 10:46 Check Messages 11:09 The Message Is Gone! 11:24 Recap of Tools Needed 12:02 Outro