How to make a multi strand button bracelet

How to make a multi strand bracelet with a button . Designing with buttons and leather clasp. Buttons are from my friend Sabrina at Sapientia Beads https://www.etsy.com/shop/SapientiaBeads 1. All strands of beads need to be the same length. 2. Leave 1 inch on each side of wire for wire guard, crimp and crimp cover. 3. Leave a 1/4 of an inch of space between toggle bar & end of beaded strands. You need this space to fit your toggle bar through the ring when closing the bracelet over your wrist for the beads to expand on. 4. Attach all the strands one by one with a heavy gauge jump ring to the connector ring. 5. Attach all the strands gathered together on one ring to the back of the button. 6. When adding beads you want to make sure the beads will be flexible and bend over the wrist, so leave a small space of wire between the end of the beading and the base of the crimp cover so it will bend over the wrist. You don’t have to much wire or bracelet won’t be strong enough. Maybe 1/4 inch wire for flexibility. 7. I am using heavy guage 6mm jump rings. Thicker bracelets will need to be adjusted with more length of wire and more space at clasp to make room for the chunkiness. You need to use wire protectors /gaurds. Tips-using a heavy gauge jump ring. A wire guard will keep it on a jump ring if you’re just using wire by itself, it can slip through the split portion of where the jumping is. If you’re using a thin jump Ring it won’t support a bracelet. But you definitely want to use a wire guard.