DIY Sequential LED Turn signals for any vehicle | Episode 98

12V-24V Mini 3 Keys Single Color LED Controller Brightness Dimmer for led 3528 5050 strip light https://s.click.aliexpress.com/e/_oC0... gadget wedda tiktok https://www.tiktok.com/@gadgetwedda?_... gadaget wedda face book   / 1bqjlggdrx   Adding LED lights to the side mirrors enhances visibility, improves safety, and gives the vehicle a stylish look. These lights can function as turn signals, puddle lights, or decorative accents. 2. Components Required LED Strips or Individual LEDs (preferably waterproof and automotive-grade) Resistors (as per the LED voltage requirements) Small Circuit Board (if additional control is needed) Wires & Connectors Relay (Optional) (for better power management) Soldering Kit (for secure connections) Electrical Tape & Heat Shrink Tubing (for insulation) 3. Installation Steps Access the Mirror Housing Remove the mirror glass carefully. Open the mirror assembly to expose internal wiring. 4 Wire the LEDs to the Circuit Connect LED positive (+) to the 12V power source (turn signal or door light wire). Connect LED negative (-) to ground. If using a relay, connect it to the vehicle’s electrical system accordingly. 5 Safety Tips Disconnect the vehicle battery before installation. Double-check polarity before powering the circuit. Use a fuse to prevent short circuits. Ensure all wiring is secure and insulated to avoid damage. thank you