(BIG) DIY PVC Roller Bearing Boat Lift!
After building a mini electric boat I wanted to be able to store it on a small floating dock. The boat weighs around 120 pounds with the batteries and motor attached and was a bit heavy for one person to heft up a steep hill. This DIY PVC bearing works extremely well, is cheap, and can be customized to different lengths. I saw a guy on Instructables that did a similar bearing: http://www.instructables.com/id/Hardw... And a YouTube build: • DIY Huge Underwater Roller bearing! PVC. The boat kit: rapidwhale.com Thanks for taking a look!
▶︎
Dock Edge+ | Watercraft Ramp Kit
▶︎
Floating A Boat Lift
▶︎
build your own water jet unit from PVC pipe and fiberglass
▶︎
No More Trailer Woes: My Electric Towing Solution!
▶︎
Boat Ramp Build $50
▶︎
Home Built Boat Slip
▶︎
1200 Roller Ramp Assembly
▶︎
DIY Kayak Roller Launch Ramp and Load Ramp
▶︎
DIY - Cheap Motorized Boat Lift
▶︎
Never Buy a Water Pump Again! A 65-Year-Old Plumber Made His Own Water Pump Using PVC Pipes
▶︎
Building Ferrari's all electric wooden boat. (Part 1)
▶︎
How I Built My Multinautic DrawBridge Roller Boat Ramp Project
▶︎
Boat Lift Installation Tools Explanation- Foam Floats, Boat Lift Crane, Wheel Kits, Foam Strips
▶︎
how i built my own jet ski
▶︎
Boat lift float and drop in place
▶︎
Building a homemade boat lift (Part 1)
▶︎
DIY water jet boat
▶︎
DIY Jet Ski Landing Ramp -Step by Step
▶︎
Never Buy a Water Pump Again! A 65-Year-Old Plumber Made His Own Water Pump Using PVC Pipes | Update
▶︎