💡 Como aumentar sua Impressora 3D ampliando a mesa aquecida: Guia passo a passo! Parte 2

This is the second video about the project on how to upgrade your 3D printer. Today I'll show you all the 3D printed parts that make up the structure where the two MK2B model heated beds will be placed. I'll talk about the ideal filaments for the printed parts, including PLA, ABS, HIPS, PETG, and TRITAN. In this video, I also mention the eccentric nut, spacer and how to adjust it, the best spring (yellow spring, blue spring, silicone spring), knob, firmware, Marlin, Klipper, and Sonic Pad. ============================== Note: All STL files and their respective editable STEP and IGES files are available in the Members area link. There you will also find the ready-made firmware as well as the editable version. ============================== If you have any questions, ask me in the comments. Subscribe to our channel and be sure to like our content. Links to items needed to modify your 3D printer: SKR 1.4 board, main board to replace the original (For the Creality line, replacement is necessary; some printers don't need replacement as they already have a board with additional power control and temperature sensor connections): https://s.click.aliexpress.com/e/_DkM... https://s.click.aliexpress.com/e/_Dkz... Nema 17 motor, 48mm and 60mm sizes, for the Y-axis: https://s.click.aliexpress.com/e/_Dln... https://s.click.aliexpress.com/e/_Dn1... https://s.click.aliexpress.com/e/_Dm1... https://s.click.aliexpress.com/e/_DCG... Heated bed 235 x 235mm and MK2 bed 214x214mm (red table): https://s.click.aliexpress.com/e/_DBk... https://s.click.aliexpress.com/e/_DDD... https://s.click.aliexpress.com/e/_DEx... https://s.click.aliexpress.com/e/_DCC... 25A MOSFET power module for heated bed control: https://s.click.aliexpress.com/e/_Dkw... https://s.click.aliexpress.com/e/_DkB... Pulleys/Casters for second table (additional table): https://s.click.aliexpress.com/e/_DET... https://s.click.aliexpress.com/e/_DBJ... 6mm fiber-reinforced belt for shaft movement Y: https://s.click.aliexpress.com/e/_Dkc... https://s.click.aliexpress.com/e/_DdZ... 24V 360W 15A and 720W 30A power supplies: https://s.click.aliexpress.com/e/_Dei... https://s.click.aliexpress.com/e/_DDR... Some more efficient HOTEND (Heated Nozzle) models: https://s.click.aliexpress.com/e/_DEA... https://s.click.aliexpress.com/e/_DBe... https://s.click.aliexpress.com/e/_DB0... Good dual gear extruder and Cheap: https://s.click.aliexpress.com/e/_DD1... https://s.click.aliexpress.com/e/_Dmq... https://s.click.aliexpress.com/e/_DFy... Sonic Pad with Klipper firmware (controls up to 4 3D printers): https://s.click.aliexpress.com/e/_DCC... https://s.click.aliexpress.com/e/_DB0... ============================== Share this video:    • 💡 Como aumentar sua Impressora 3D ampliand...   ============================== 00:00 - Introduction 05:00 - Guidance on spacer and eccentric nut 06:00 - How the eccentric nut is and how it works 09:40 - Audio situation guidance 10:25 - Which V-slot pulley to buy 11:00 - Ideal type of hexagonal nut 12:43 - What is the ideal tightening torque on the V-slot pulley 14:20 - Where to find the bill of materials and 3D files 18:00 - Eccentric nut adjustment in practice 25:00 - Start of wing (tab) assembly 30:30 - Pay attention to the correct side for attaching the wings (tabs) 33:29 - This is the correct side for attaching 33:50 - The red heated bed is called MK2B 36:15 - You can skip ahead to some parts of the video 38:50 - Use a 5mm drill bit in all the wing mounting holes 40:50 - Guidance on the aluminum bed video 235x235mm 43:25 - Advantage of Polystyrene over ABS (card above) 44:35 - What is the ideal material for nuts, bolts and washers? 45:50 - Where do I buy the bolts, nuts and washers? 52:53 - Where is the junction of the two heated beds of the 3D Printer? 01:02:03 - Now I will repeat the assembly for another part of the bed 01:07:57 - I will use the Sonic Pad to optimize 4 stretched printers 01:13:50 - Good spring to use between the heated bed and the structure 01:17:50 - Instruction on parameters for slicing the structure parts 01:24:10 - Joining the printing beds 01:28:53 - Observe the space between the parts for correct assembly 01:32:40 - Stretched bed structure Assembled 01:37:57 - Screw size for attaching spring, table and frame 01:39:00 - Change of plans, this is now the ideal screw and knob 01:41:37 - Knob size specification 01:42:06 - Modeling the knob 01:43:34 - Timelapsed 3D printing the knob 01:43:40 - Assembly of the screw, spring and knob set ============================== #Increase3DPrinter #IncreaseHeatedBed #Stretching3DPrinter #Larger3DPrinter #Modifying3DPrinter #Upgrade3DPrinter #3DPrinting #3DPrinter #3DLEGACY