【フリードプラス】あの機能を使ったら居心地良すぎて・・・【ラゲッジボード自作】

It was Freed Plus luggage board making. This is an introduction of the parts used this time. There may be a simpler way to make it, but for reference (^ ^) / Please comment if you have any questions. ・"Color shelf" size 1800 x 16 x 400 (mm) ... 1 sheet ・"Stainless steel hexagon bolt" M6 x 40 (mm) pitch 1 mm x 6 ・"Stainless flat head screw" M6 x 25 (mm) pitch 1 mm x 2 ・"Wing nut" for M6 x 2 ・"Stainless steel stay" (L-shaped metal fitting) For M6 bolts Long side 69, Short side 44, Width 20 (mm) *It is recommended that the hole position has play. ・"Non-slip sheet" purchased at 100 yen [Wood processing] How to make a top plate ① Cut from both sides of the color shelf board by 50 (mm). (Two) ② Drill a hole with a diameter of 6 mm to match the nut spacing of 1250 (mm). ③ Stick anti-slip sheets on both sides to prevent scratches when attached to the vehicle body. How to make a top plate ① Create a sample with imitation paper ② Long side cut at 1275 (mm) ③ Cut the corners to match the imitation paper ④ Check the connection with the L-shaped metal fitting and make a hole (6 mm)